Call 08048604604 77% Response Rate

our range

Laboratory Water Purification Systems

Our technology combines Reverse Osmosis with multi stage filtration modules for producing Analytical/ Reagent Grade Ultrapure Water Purification Systems which meets ASTM/CAP/NCCLS specifications.
  • Dura-Q Premium-5/10/15/20/25/30/35/40/50(Integrated Unit producing Type-I,Type-II&Type-III Water)
  • Dura-Q Premium-5/10/15/20/25/30/35/40/50(Integrated Unit producing Type-I,Type-II&Type-III Water)
  • Dura-Q Premium-5/10/15/20/25/30/35/40/50(Integrated Unit producing Type-I,Type-II&Type-III Water)
  • Dura-Q Premium-5/10/15/20/25/30/35/40/50(Integrated Unit producing Type-I,Type-II&Type-III Water)
  • Dura-Q Premium-5/10/15/20/25/30/35/40/50(Integrated Unit producing Type-I,Type-II&Type-III Water)
  • Dura-Q Premium-5/10/15/20/25/30/35/40/50(Integrated Unit producing Type-I,Type-II&Type-III Water)
  • Dura-Q Premium-5/10/15/20/25/30/35/40/50(Integrated Unit producing Type-I,Type-II&Type-III Water)
Dura-Q Premium-5/10/15/20/25/30/35/40/50(Integrated Unit producing Type-I,Type-II&Type-III Water)

Dura-Q Premium-5/10/15/20/25/30/35/40/50(Integrated Unit producing Type-I,Type-II&Type-III Water)

Rs 6 Lakh  / PieceGet Best Price

Product Brochure

Usage/ApplicationIndustries
Automation GradeSemi-Automatic
MaterialStainless Steel
Purification MethodReverse Osmosis
Frequency Range30-40Hz
Voltage120V
Country of OriginMade in India
Highlights:
  • Type 1 ,Type-II & Type - 3 Water in a Single Integrated System.
  • Three stage Integrated pretreatment module of 10μ/5μ/1μ/0.5μ/iron filter, activated carbon, antiscalant,enough to protect and enhance the life of the precious cartridges
  • High recovery upto 60% of water with Polyamide T.F.C. membrane double R.O. Pass.
  • Most economical Ultra pure grade water cost per liter as compared to other systems available in the market.

Feed Water Specifications: 
Potable Tap water with pressure  0.5 kg to 1.5 Kg (1-6 bar or better),Conductivity: upto 2000µS/cm, Chlorine:<3ppm, SDI <12, TOC<2000ppb, CO2: < 50ppm, Silica  <30ppm, Temperature: 4 to 40 Degree C,  Flow rate: up to 75 L/hr, Drain: > 90L/hr, System  include Pre-Filtration Cartridge (1,5 & 10 µ ) with Booster Pump and 01 Bio filter (point-of-use Biofilter of 0.2micron) to remove residual biologically active contaminants

Specifications:

Water Purification System Model:

Dura-Q Premium

Display 

5.7” TFT /LED/LCD

Display

Product Water 

Type-I/Type-II/Type-III

Type-I Grade Water

Specifications:-


Resistivity 

18.2 MOhm.cm

at 25°C

Conductivity

0.05µS/cm

TOC

<5ppb*

Particulates

(>0.1µm&<0.22µm)

<1/ml

Bacteria

(1cfu/100ml)

<0.01cfu/ml

Endotoxins/

Pyrogens (EU/ml)

<0.001

RNase (ng/ml)

<0.001

DNase (pg/µl)

<0.005

Dispense Rate

(Programmable)

> 2L/min

UF Membrane

(NMWL/MWCO)

5000

End Point Filter

0.2,0.1µ

(EFA: 250cm/260cm )

Type-II Grade Water

Specifications:-


Resistivity

10-15 MOhm.cm

at 25°C

Conductivity

0.1- 0.06µS/cm

Dispense Rate

(Programmable)

upto 2L/min

TOC

<20ppb***

Particulates

(>0.1µm &<0.2µm)

<1/ml

Bacteria (cfu/10ml)

<0.1cfu/ml

Deionization

Mixed Bed

Resins/EDI****

Type-III Grade Water

Specifications:-


Conductivity

<20µS/cm***

Product Flow Rate

(L/hr)

5/10/15/20/25/30

Tank

Integrated/ Inbuilt

Feed/RO/%Rejection

MonitoringYes

Yes

Cell Constant

 

K= 0.01/0.1/1.0

View Complete details

get quote request a call back
  • Lab Q-II Series (Analytical Grade Water)
  • Lab Q-II Series (Analytical Grade Water)
  • Lab Q-II Series (Analytical Grade Water)
  • Lab Q-II Series (Analytical Grade Water)
  • Lab Q-II Series (Analytical Grade Water)
  • Lab Q-II Series (Analytical Grade Water)
  • Lab Q-II Series (Analytical Grade Water)
Lab Q-II Series (Analytical Grade Water)

Lab Q-II Series (Analytical Grade Water)

Rs 1.75 Lakh  / PieceGet Best Price

Minimum Order Quantity: 01 Piece

Product Brochure

Usage/ApplicationIndustries
Automation GradeSemi-Automatic
MaterialStainless Steel
Water SourceBorewell Water
Frequency Range30-40Hz
Voltage120V
Country of OriginMade in India


Highlights:

  • Single stage pre-filteration setup of 10µ/5µ/1µ to protect and enhance the life of the RO cartridges.
  • Better substitute to Quartz/ Glass Single/ Double** Distillation Apparatus, TDS is zero.
  • Easy quick fit connectors to exchange filter/module of the water purification system.
  • Very Low Electricity consumption as compared to conventional distillation apparatus, low maintenance.
  • Saves potable water from tap up to100L/hr VS distillation units.
  • High recovery rate>30% of double RO Pass
  • No Scaling problem as compared to Distillation.
  • Saves Water as compared to conventional distillation method.
  • Rapid and simple disinfection.

 

Specifications:

Water Purification System Model:

LabQ-II Series

Display

16×4 Character LCD

Resistivity

>10 Mohm.cm at 25°C

Conductivity

< 0.1µS/cm

Ionic Rejection

> 98%

Inorganics&Particulates

Rejection

> 99%

TOC (ppb)

<30ppb*

Bacteria/Microbial

Particles

<50cfu/ml)

Flow Rate/Auto

dispense Rate

5/10/15/20 Ltr/Hr

Product Water Grade

Type II**

Product Water

Monitoring

Yes

% RO Rejection

Yes

Auto Flushing with

Customized TimesYes

Yes

Feed Water Monitoring

Yes

Cell Constant (K)

0.1/0.01

Temperature

Compensation

0 to 100°C

Low/ High Feed

Water Protection

Yes

Tank

Yes

Prefiltration

Three Stage

Datalogging

Yes

* Feed Water TOC <250ppb

** Depends upon feed water conductivity <300µS/cm



Additional Information:

  • Production Capacity: 5/10/15/20 LPH

View Complete details

get quote request a call back
  • Lab Pure Series (Lab Grade Water)
  • Lab Pure Series (Lab Grade Water)
  • Lab Pure Series (Lab Grade Water)
  • Lab Pure Series (Lab Grade Water)
  • Lab Pure Series (Lab Grade Water)
  • Lab Pure Series (Lab Grade Water)
  • Lab Pure Series (Lab Grade Water)
Lab Pure Series (Lab Grade Water)

Lab Pure Series (Lab Grade Water)

Rs 1 Lakh  / PieceGet Best Price

Minimum Order Quantity: 01 Piece

Product Brochure

Capacity(LPH)5/10 LPH
Usage/ApplicationIndustries
Automation GradeSemi-Automatic
MaterialStainless Steel
Frequency Range30-40Hz
Voltage120V
Country of OriginMade in India

Highlights:

  • Single stage pre-filteration setup of 10µ/5µ/1µ to protect and enhance the life of the RO cartridges
  • Better substitute to Quartz/ Glass Single/ Double** Distillation Apparatus, TDS is zero.
  • Easy quick fit connectors to exchange filter/module
  • Very Low Electricity consumption as compared to conventional distillation apparatus, low maintenance.
  • Saves potable water from tap up to100L/hr VS distillation units
  • High recovery rate>30% of double RO Pass
  • No Scaling problem as compared to Distillation Saves Water as compared to conventional distillation method. Rapid and simple disinfection

 

Specifications:

 

Water Purification System Model:

Lab Pure

Display

16×2 Character LCD

Resistivity

0.1-1.0 Mohm.cm

at 25°C

Conductivity

10-1µS/cm

Ionic Rejection

> 98%

Inorganics&Particulates

Rejection

> 99%

TOC (ppb)

<50ppb*

Bacteria/Microbial

Particles

<100cfu/ml)

Flow Rate/Auto

dispense Rate

5/10/15/20 Ltr/Hr

Product Water Grade

Type III

Product Water

Monitoring

Yes

% RO Rejection

Yes

Auto Flushing with

Customized Times

Yes

Feed Water Monitoring

Yes

Cell Constant (K)

1.0/0.1

Temperature

Compensation

0 to 100°C

Low/ High Feed

Water Protection

Yes

Tank

Optional

Prefiltration

Single Stage (Micron)

Datalogging

-------

* Feed Water TOC <250ppb

** Depends upon feed water conductivity <300µS/cm



Additional Information:

  • Production Capacity: 5LPH / 10LPH

View Complete details

get quote request a call back
  • Ultra Plus Series (Ultrapure Grade Water)
  • Ultra Plus Series (Ultrapure Grade Water)
  • Ultra Plus Series (Ultrapure Grade Water)
  • Ultra Plus Series (Ultrapure Grade Water)
  • Ultra Plus Series (Ultrapure Grade Water)
  • Ultra Plus Series (Ultrapure Grade Water)
  • Ultra Plus Series (Ultrapure Grade Water)
  • Ultra Plus Series (Ultrapure Grade Water)
Ultra Plus Series (Ultrapure Grade Water)

Ultra Plus Series (Ultrapure Grade Water)

Rs 3.95 Lakh  / PieceGet Best Price

Minimum Order Quantity: 01 Piece

Product Brochure

Usage/ApplicationIndustries
Automation GradeSemi-Automatic
MaterialStainless Steel
Purification MethodReverse Osmosis
Frequency Range30-40Hz
Voltage120V
Country of OriginMade in India


Highlights:

  • Integrated table top/wall mounted sleek lab water system.
  • Produces Type-I water and TDS is Zero.
  • Lowest initial investment towards the cost of the system.
  • Three stage pre-filteration of10µ/5µ/1µ/0.5µ, Flowrate:50LPH Feed Water: RO/DI water.

 

Specifications:

Model Ultra Plus UV Model Ultra Plus UF Model
Display 5.7” TFT /LED/LCDGraphic Display 5.7”TFT /LED/LCDGraphic Display
Resistivity 18.2 Mohm.cm at 25°C 18.2 Mohm.cm at 25°C
Conductivity 0.05 µS/cm 0.05 µS/cm
Online UV absorbance 254nm 254nm
UF Membrane (NMWL/MWCO/Dalton) ------- 5000
Particulates (>0.1µm & <0.22 µm) <1/ml <1/ml
TOC (ppb) <10ppb* <5ppb*
Bacteria (1cfu/100ml) <0.01cfu/ml <0.01cfu/ml
Endotoxins/ Pyrogens (EU/ml) ------- <0.001
End Point Filter 0.22 micron (EFA- 260 cm2 ) 0.22 micron (EFA- 260 cm2 )
FlowRate/Auto volume dispense rate 0.01 to>= 2L/min 0.01 to >= 2L/ min
Dnase ------- <0.005pg/µL
Rnase ------- <0.001ng/ml
Analytical Instruments Yes Yes
AAS/ICP/MS/IC Yes Yes
HPLC/GC/TOC Yes Yes
Organic Analysis Yes Yes
Cell & Tissue Culture No Yes
In Vitro Fertilization No Yes
Electrophoresis/ PCR No Yes
DNA Sequencing No Yes
Molecular Biology No Yes
*1-2ppb with Dual UV Lamp,pH:7/Neutral with online measurement,Turbidity in NTU of Ultra Pure water:0.04
ELEMENTAL ANALYSIS(ppb):
Fe,Cu,Al,Ni,Zn,Cr,Na,K,Cl,NO2,NO3,SO4:<0.005

Additional Information:

  • Production Capacity: Up to 2L/minute

View Complete details

get quote request a call back
  • Lab Q-I Series (Integrated Lab Grade & Analytical Grade Water)
  • Lab Q-I Series (Integrated Lab Grade & Analytical Grade Water)
  • Lab Q-I Series (Integrated Lab Grade & Analytical Grade Water)
  • Lab Q-I Series (Integrated Lab Grade & Analytical Grade Water)
  • Lab Q-I Series (Integrated Lab Grade & Analytical Grade Water)
  • Lab Q-I Series (Integrated Lab Grade & Analytical Grade Water)
  • Lab Q-I Series (Integrated Lab Grade & Analytical Grade Water)
Lab Q-I Series (Integrated Lab Grade & Analytical Grade Water)

Lab Q-I Series (Integrated Lab Grade & Analytical Grade Water)

Rs 1.25 Lakh  / PieceGet Best Price

Minimum Order Quantity: 01 Piece

Product Brochure

Capacity(LPH)5-10LPH
Automation GradeSemi-Automatic
MaterialStainless Steel
Water SourceBorewell Water
Voltage120V
Country of OriginMade in India


Highlights:

  • Single stage pre-filteration setup of 10µ/5µ/1µ to protect and enhance the life of the RO cartridges
  • Better substitute to Quartz/ Glass Single/ Double** Distillation Apparatus, TDS is zero.
  • Easy quick fit connectors to exchange filter/module
  • Very Low Electricity consumption as compared to conventional distillation apparatus, low maintenance.
  • Saves potable water from tap up to100L/hr VS distillation units
  • High recovery rate>30% of double RO Pass
  • No Scaling problem as compared to Distillation Saves Water as compared to conventional distillation method. Rapid and simple disinfection

 

Specifications:

Water Purification System Model:

LabQ-I

Display

16×4 Character LCD

Resistivity

1-5 Mohm.cm at 25°C

Conductivity

1-0.2µS/cm

Ionic Rejection

> 98%

Inorganics &

Particulates Rejection

> 99%

TOC (ppb)

<30ppb*

Bacteria/Microbial

Particles

<100cfu/ml)

Flow Rate/Auto

dispense Rate

5/10/15/20 Ltr/Hr

Product Water Grade

Type III/Type II**

Product Water

Monitoring

Yes

% RO Rejection

Yes

Auto Flushing with

Customized Times

Yes

Feed Water Monitoring

Yes

Cell Constant (K)

0.1/0.01

Temperature

Compensation

0 to 100°C

Low/ High Feed Water

Protection

Yes

Tank

Yes

Prefiltration

Double Stage (Micron)

Datalogging

Yes

* Feed Water TOC <250ppb

** Depends upon feed water conductivity <300µS/cm



Additional Information:

  • Production Capacity: 5/10/15/20 LPH

View Complete details

get quote request a call back
  • Analytica Series (Analytical Grade Water)
  • Analytica Series (Analytical Grade Water)
  • Analytica Series (Analytical Grade Water)
  • Analytica Series (Analytical Grade Water)
  • Analytica Series (Analytical Grade Water)
  • Analytica Series (Analytical Grade Water)
  • Analytica Series (Analytical Grade Water)
Analytica Series (Analytical Grade Water)

Analytica Series (Analytical Grade Water)

Rs 3.9 Lakh  / PieceGet Best Price

Product Brochure

Capacity(LPH)4/6/10/15/20/25/30/35/50 LPH
Usage/ApplicationIndustries
Automation GradeSemi-Automatic
MaterialStainless Steel
Purification MethodReverse Osmosis
Voltage120V
Deliver TypePAN India
Country of OriginMade in India


Highlights:

  • Three Stage pre-filteration setup of 10µ/5µ/1µ/0.5µ/iron filter, activated carbon to protect and enhance the life of the precious cartridges.
  • Low initial investment while buying the water purification system.
  • High flux thin film composite (TFC) polyamide RO membranes.
  • EDI’s continuous self regeneration process improves water quality.

 

Specifications:

Models Analytica-2/3/4/6/10/15/20/25/30/35/40/50 Analytica EDI-2/3/4/6/10/15/20/25/30/35/40/50
Display 5.7” TFT /LED/LCDGraphic Display 5.7” TFT /LED/LCDGraphic Display
Product Flow Rate 2/3/4/6/10/15/20/25/30/35/40/50L/Hr 2/3/4/6/10/15/20/25/30/35/40/50L/Hr
Product Water Resistivity (at 25°C) 10-15 Mohm.cm 10-15 Mohm.cm
Conductivity 0.1-0.06 µS/cm 0.1-0.06 µS/cm
Cell Constant (K) 0.01/0.1/1.0 0.01/0.1/1.0
Ionic & Organic Rejection/Removal >99% >99%
Silicate Rejection >99.9% >99.9%
Bacterial Count (cfu/10ml<1) <0.1cfu/ml <0.1cfu/ml
On line UV Absorbance 254nm 254nm
TOC <20ppb* <20ppb*
Temperature Compensation 0-100°C 0-100°C
Deionization Mixed Bed Resins Based Continuous self Regeneration Electrodeionzation Based

*only if online UV in the system and feed water TOC <250ppb
* 1-2ppb with dual UV,pH:7/Neutral with online measurement,Turbidity in NTU of Pure Water<0.04

View Complete details

get quote request a call back
  • Dura-Q Classic-5/10/15/20/25/30/35/40/50 LPH(Integrated Unit Producing Type-I & Type-II Water)
  • Dura-Q Classic-5/10/15/20/25/30/35/40/50 LPH(Integrated Unit Producing Type-I & Type-II Water)
  • Dura-Q Classic-5/10/15/20/25/30/35/40/50 LPH(Integrated Unit Producing Type-I & Type-II Water)
  • Dura-Q Classic-5/10/15/20/25/30/35/40/50 LPH(Integrated Unit Producing Type-I & Type-II Water)
  • Dura-Q Classic-5/10/15/20/25/30/35/40/50 LPH(Integrated Unit Producing Type-I & Type-II Water)
  • Dura-Q Classic-5/10/15/20/25/30/35/40/50 LPH(Integrated Unit Producing Type-I & Type-II Water)
  • Dura-Q Classic-5/10/15/20/25/30/35/40/50 LPH(Integrated Unit Producing Type-I & Type-II Water)
Dura-Q Classic-5/10/15/20/25/30/35/40/50 LPH(Integrated Unit Producing Type-I & Type-II Water)

Dura-Q Classic-5/10/15/20/25/30/35/40/50 LPH(Integrated Unit Producing Type-I & Type-II Water)

Rs 5.5 Lakh  / PieceGet Best Price

Minimum Order Quantity: 01 Piece

Product Brochure

Usage/ApplicationIndustries
Automation GradeSemi-Automatic
MaterialStainless Steel
Frequency Range30-40Hz
Voltage120V
Country of OriginMade in India


Highlights:

  • Three stage Integrated pretreatment module of 10µ/5µ/1µ/0.5µ/iron filter, activated carbon, antiscalant,enough to protect and enhance the life of the precious cartridges.
  • High recovery upto 60% of water with polyamide T.F.C.membrane double RO Pass.
  • Ionic and Organic Rejection/Removal: >99%.

Feed Water Specifications: Potable Tap water with pressure  0.5 kg to 1.5 Kg (1-6 bar or better),Conductivity: upto 2000µS/cm, Chlorine:<3ppm, SDI <12, TOC<2000ppb, CO2: < 50ppm, Silica  <30ppm, Temperature: 4 to 40 Degree C,  Flow rate: up to 75 L/hr, Drain: > 90L/hr, System  include Pre-Filtration Cartridge (1,5 & 10 µ ) with Booster Pump and 01 Bio filter (point-of-use Biofilter of 0.2micron) to remove residual biologically active contaminants

Specifications:

Water Purification System Model:

Dura-Q Classic

Display 

5.7” TFT /LED/LCDc

Display

Product Water 

Type-I/ Type-II

Type-I Grade Water

Specifications:-


Resistivity 

18.2 MOhm.cm at

25°C

Conductivity

0.05µS/cm

TOC

<5ppb*

Particulates

<1/ml

Bacteria

<0.01cfu/ml

Endotoxins/

Pyrogens (EU/ml)

<0.001

RNase (ng/ml)

<0.001

DNase (pg/µl)

<0.005

Dispense Rate

(Programmable)

> 2 L/min

UF Membrane

(NMWL/MWCO)

5000

End Point Filter               

0.2,0.1 µ

(EFA: 250cm/260cm 2)2

Type-II Grade Water

Specifications:-


Resistivity

10-15MOhm.cm

at 25°C

Conductivity

0.1-0.06µS/cm

Dispense Rate

(Programmable)

upto 2 L/min

TOC

<20ppb***

Particulates

(>0.1µm &<0.2µm)

<1/ml

Bacteria (cfu/10ml)

<0.1cfu/ml



Additional Information:

  • Production Capacity: 5/10/15/20/25/30/35/40/50 LPH

View Complete details

get quote request a call back
  • Ultrapure Grade Water Model: Lab Ultra
  • Ultrapure Grade Water Model: Lab Ultra
  • Ultrapure Grade Water Model: Lab Ultra
  • Ultrapure Grade Water Model: Lab Ultra
  • Ultrapure Grade Water Model: Lab Ultra
  • Ultrapure Grade Water Model: Lab Ultra
  • Ultrapure Grade Water Model: Lab Ultra
  • Ultrapure Grade Water Model: Lab Ultra
  • Ultrapure Grade Water Model: Lab Ultra
Ultrapure Grade Water Model: Lab Ultra

Ultrapure Grade Water Model: Lab Ultra

Rs 2 Lakh  / PieceGet Best Price

Minimum Order Quantity: 01 Piece

Product Brochure

Usage/ApplicationIndustries
Automation GradeSemi-Automatic
MaterialStainless Steel
Frequency Range30-40Hz
Voltage120V
Motor1 kw
Country of OriginMade in India


Highlights:

  • High recovery upto 55% of water with TFC polyamide R.O. module.
  • Type-I Water in a Single compact bench top/wall mounting system.
  • Ultra Pure Water directly from tap water
  • Prefil-I/Prefill-III stage pre filtration setup.

 

Specifications:

PARAMETERS Model: Lab-Ultra
Display 16×4 Character LCD
Resistivity

18.2 MOhm.cm

at 25°C m at 25°C

Conductivity 0.05µS/cm
Ionic Rejection > 99%

Inorganics and

Particulates Rejection

> 99%
TOC (ppb) < 5ppb*

Particulates

( >0.22µ/ml)

<1
Bacteria (cfu/100ml) <0.01cfu/ml

Endotoxins/

Pyrogens (EU/ml)

<0.001**
Rnase (ng/ml) <0.001**
Dnase (pg/µl) <0.005**

Auto Volume

Dispense/Product

Flow Rate(Type-I)

100 to 1000ml/min***

UF Membrane

(NMWL/MWCO)

5000 (Optional)
End Point Filter

0.22 micron

(EFA: 260cm2)

% RO Rejection Yes

Auto Flushing with

Customized Times

Yes
Feed Water Monitoring Yes
Cell Constant (K) 0.01/0.1

Temperature

Compensation

0 to 100°C

Low/ High Feed

Water Protection

Yes
Tank Optional
Prefiltration Three Stage


Additional Information:

  • Production Capacity: 5/10/15/20LPH

View Complete details

get quote request a call back
  • Direct Ultra-TUVF-5/10/15/20/25/30/35/40/50
  • Direct Ultra-TUVF-5/10/15/20/25/30/35/40/50
  • Direct Ultra-TUVF-5/10/15/20/25/30/35/40/50
  • Direct Ultra-TUVF-5/10/15/20/25/30/35/40/50
  • Direct Ultra-TUVF-5/10/15/20/25/30/35/40/50
  • Direct Ultra-TUVF-5/10/15/20/25/30/35/40/50
  • Direct Ultra-TUVF-5/10/15/20/25/30/35/40/50
Direct Ultra-TUVF-5/10/15/20/25/30/35/40/50

Direct Ultra-TUVF-5/10/15/20/25/30/35/40/50

Rs 4 Lakh  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Usage/ApplicationIndustries
Automation GradeFully Automatic
MaterialStainless Steel
Deliver TypePAN India
Country of OriginMade in India
Our Direct Ultra Series of water purification systems offers an economical Type-I (Ultrapure grade), Type III (Lab grade) water in a single integrated table top/wall mounted sleek unit.

Highlights:

  • High recovery upto 60% of water with Polyamide T.F.C. membrane double RO Pass
  • Three Stage pre-filteration of 10µ/5µ/1µ/0.5µ,Iron filter, activated carbon,antiscalant. enough to protect and enhance the life of the precious cartridges
  • Most economical ultrapure grade water purification cost per liter as compared to other systems available in the market.
  • High quality T.F.C.Polyamide RO membrane >200 Dalton cutoff, Ion Rejection: >99%.

Feed Water Specifications: Potable Tap water with pressure  0.5 kg to 1.5 Kg (1-6 bar or better),Conductivity: upto 2000µS/cm, Chlorine:<3ppm, SDI <12, TOC<2000ppb, CO2: < 50ppm, Silica  <30ppm, Temperature: 4 to 40 Degree C,  System  include Pre-Filtration Cartridge (1,5 & 10 µ ) with Booster Pump and 01 Bio filter (point-of-use Biofilter of 0.2micron) to remove residual biologically active contaminants

Specifications:

Display

5.7” TFT Graphical Display

Type-I Grade Water:

Resistivity

18.2Mohm.cm at 25°C

Conductivity

0.05μS/cm

TOC

<5ppb*

Particulates

(>0.1μ/ml)

<1

Bacteria(cfu/ml)

<0.1

Endotoxins/

Pyrogens(EU/ml)

<0.001

RNase(ng/ml)

<0.001

DNase(pg/μl)

<0.005

Product Dispense

Rate

0.01 to > 2L/min

(Programmable)

UF Membrane

(NMWL/MWCO)

5000

End Point Filter

0.22micron(EFA:260cm2)

Deionization

Mixed Bed Resins

Type-III Grade

Water:

Conductivity

<20μS/cm**

Product Flow

Rate(L/hr)

5/10/15/20/25/30/35/40/50

Tank

Yes

Feed/RO/%Rejection

Monitoring

Yes

Cell Constant K

0.01/0.1



Additional Information:

  • Production Capacity: 5/10/15/20/25/30/35/40/50 LPH

View Complete details

get quote request a call back
  • Mili Q Water System
  • Mili Q Water System
Mili Q Water System

Mili Q Water System

Rs 95,000  / PieceGet Best Price

Product Brochure

Capacity(LPH)5LPH
Usage/ApplicationIndustries
Automation GradeSemi-Automatic
MaterialStainless Steel
Voltage120V
Motor2 kw
Country of OriginMade in India

Display

16x4 Character LCD

Resistivity

0.05-1Mohm.cm at 25°C

Conductivity

1-20μS/cm

Ionic Rejection

>98%

Inorganic & Particulate Rejection

>99%

TOC(ppb)

<50ppb*

Product Flow Rate

5-6L/Hr

Product Water Grade

Type III

Product Water Monitoring

Yes

%RO Rejection

Yes

Auto Flushing with Customized Times

Yes

Feed Water Monitoring

Yes

Cell Constant

0.1/1.0

Temperature Compensation

0-100°C

Low/High Feed Water Protection

Yes

Tank

Optional

Prefiltration

Single Stage(Micron)

Datalogging

-

Communication Port

-

*Feed Water TOC <250ppb

Product Quality: Type-III Clinical Grade Water
FEED WATER REQUIREMENT:
Conductivity:<500μS/cm
Temperature:<50°C
Fouling Index:upto12
Coaxial Conductivity Cell
MOC:SS316L
OTHER SPECIFICATIONS:
Controller:Microprocessor based microcontroller with Keypads
Supply:230V±10%,50Hz,AC
Consumption:60W/Hr
Weight:10Kg(approx)
Dimensions:535mm(H),330mm(W),280mm(D)
ACCESSORIES:
  • Single Stage Prefiltration
  • Storage Tank 10L with Vent filter and Level Sensors
  • Power Cord
  • Instruction Manual
OPTIONAL ACCESSORIES:
  • UV with 254nm wavelength
  • Storage Tank 20/50L capacity with Vent Filter
  • EPF 0.20μ with filling bell having 260 cm2 EFA
  • High Flow Rate Models on Demand

View Complete details

get quote request a call back
Analytica EDI +Ultra Plus UF Water Purification System

Analytica EDI +Ultra Plus UF Water Purification System

Price on Request

Product Brochure

Capacity Inlet Flow Rate (cubic meter/hour)80 L/Hour
Type Of Purification PlantsReverse Osmosis, Microfilteration
Maximum Operating Pressure1-1.5kg/cm2
Water SourceRO water/DI/DM Water
MembraneRO membranes and EDI Module
Resistivity15MOhm.com
Motor (kw)60 W
Dimensions (Mtrs)550mm(H),420mm(W),505mm(D)
Material of ConstructionPVC, Acrylic/ ABS/GI Powder coated
Brand"Bio-Age"
Automation GradeFully Automatic
ConditionNew
Installation Services RequiredYes

Display

5.7”TFT Graphic Display

Product Output Flow

4/6/10/15/25L/Hr

Product Water Resistivity(at 25°C)

10-15Mohm.cm

Conductivity

0.06-0.1 µS/cm

Cell Constant(K)

0.01/0.1/1.0

Ionic Rejection

>99%

Silicate Rejection

>99.9%

Bacterial Count(cfu/10ml)

<1

On-line UV Absorbance

254nm

TOC

<20ppb*

Temperature Compensation

0-100°C

Deionization

Continuous Regeneration Electro deionization Based

*only if online UV incorporated in the system & feed water TOC <250ppb
* 1-2ppb with dual UV,pH:7/Neutral with online measuremnet,Turbidity in NTU for Pure Water<0.04.

 

FEED WATER REQUIREMENT

Pressure:0.5Kg-1.5Kg(7.11psi-21.3psi

Conductivity upto 2000µS/cm

Temperature:<50°C

Chlorine:<0.5ppm

CO2:<50ppm

Fouling Index(SDI):upto 12

Auto Flushing: Every time system is switched on it goes for flushing mode to drain out all the contamination grown inside the stagnant water in cartridges/membranes.

Flushing Time: Customized, can be repeated or cancelled by pressing excape mode button.

Cleaning of R.O. Membrane: Automatic by flushing mode.

Safety Functions: Low/high pressure protection to R.O. module by switching off the supply to R.O. pump.

Cartridge R.O. Exchange Alarm: System gives audio/visual alarm to replace the cartrtidges with leftover time display.

R.O. Exchange Alarm: Audio/visual alarm for low rejecting R.O. cartridge with system switch off.

Tank: Fitted with Multiple/Three level switches & vent filter to synchronize with system to operate it automatically. System switches on/off according to level of water in tank.

R.O. Pump:System incorporates low noise,high pressure R.O. Pump with temperature feedback. 

StandBy Mode: Recirculation loop at standby position(each hour repeatedly) to maintain the water quality and cartridges life in good condition.
Systems available without storage tank and UV in it.
Water storage tanks above 50L available on demand.
Pressure Tanks of 12/16/50L available on demand.
OTHER SPECIFICATIONS:
Microprocessor based microcontroller
Coaxial Conductivity Cell
R.O.membrane with 100-200Dalton cutoff with 95-99% rejection
Inbuilt Data storage for 1year can be transferred to PC,GLP Compliant.
Supply:230V±10%,50Hz,AC
Consumption:60W/Hr
Wt:25Kgs(approx)
Dimensions:550mm(H),420mm(W),505mm(D)
ACCESSORIES:

  • Prefil-III set of Cartridge & Pressure Gauge R.O. module
  • Initial cartridge set
  • Storage Tank 20-50L Polycarbonate/PP/HDPE with 0.22μ vent filter,high/low level sensors
  • Power cord
  • Instruction manual


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES